Lubrication Fittings & Accessories

Lubrication Straight Connector
These connectors are available in difference sizes in Metric and BSP, NPT Threads. Depending on the application bearing end fitting this will be a part of accessories. These fittings will be supplied extra as required. These fittings are manufactured with high precision with rigid material also can handle harsh environments demanded by the applications.

Hose Collar with Hose Stud Bend 90°
These 90° bend fittings are used to connect the high-pressure grease hose with the lube point fitting. Available in both Stainless steel and Carbon steel. These are precisely and specially designed for delivering the lubricant in to bearing lube point by withstanding even high pressure. These fittings are required for smooth operation of an automatic lubrication system.

Hose Collar with Hose stud Straight
These straight fittings are used to connect the high-pressure grease hose with the lube point fitting. Available in both Stainless steel and Carbon steel. These are precisely and specially designed for delivering the lubricant in to bearing lube point by withstanding even high pressure. These fittings are required for smooth operation of an automatic lubrication system.

Ferrule
Ferrules or compression fittings is a type of ring or cap that is connected to hold the tube. The body’s angled shape radially compresses the end of the ferrule onto the outer diameter of the tubes. It is the radial compression that creates the leak tight seal between the fitting, ferrule and tube.

NUT
Compression nut or coupling nut is used to tightened down onto the ferrule, it compresses the ferrule tightly against the tube, creating a leak proof sealing. These are safe to reused, Leaks are only possible if they are not properly installed to each end of the fitting.

Lubrication Elbow Connector
Elbow connectors are used to change the directions of the tubes Most commonly 90 degrees and 45 degrees turn.

Distributor Dummy Plug
Dummy plugs are precisely designed to plug a port in our progressive distributor. These fittings are specially manufactured based on our requirement. Progressive distributor output will be plugged and combined by using this dummy plug or closure plug.

Distributor Outlet Adapter (Check Valve)
Outlet adapters or check valve fittings are used as a connector in progressive distributor, these are specially manufactured to give precise output qty to each lube point. These fittings are designed with non-return valve to stop the outgoing grease to get inside into the distributor during the back pressure. It will withstand high pressure demanded by the applications

Lubrication Banjo Connector
These connectors are available in difference sizes in Metric and BSP, NPT Threads. Depending on the application bearing end fitting this will be a part of accessories. These fittings will be supplied extra as required. These fittings are manufactured with high precision with rigid material also can handle harsh environments demanded by the applications.

Lubrication Push Type fitting
These are one touch fitting or push in fitting available in different thread size metric as well as BSP threads. These are designed in high precision and reliable technology with special materials. It provides a leak free easy connection between hoses in a lubrication system. Generally, these fittings are used to reduce the workforce hours to speedup the machine production hours. When you push the tube into the push fitting, the tubing should go in far enough hold by the collet. ... If the tubing does not get pushed to the O-ring, it will leak.
